|
MÜTEKS Polishing Machine
Polishing machine composed a tension system as an elektrical engine, a holding level, body and two pulleys which are placed in polishing band on the body can be used mobile or fixing on a bench. The polishing is achieved through polishing band which is rotating on machine. |
| |
|
MÜTEKS Angle sharpening apparatus
The angles and surfaces of stones which are used at grinding the valve seat are damaged while grinding. The stones of which angels are damaged should be adjusted through sharpening. MÜTEKS angle sharpening apparatus is ideal for this process. |
|
| |
|
|
MÜTEKS Pilot Spindles
The stone mandrels are in two models as Souix and Black Decker; the Souix model is with bearing and the Black Decker model is with inner tower. Valve Seat grinding pilot models are in 50 Rockvel hardness and resistant to abrasion. |
| |
|
MÜTEKS Stones
They are stones in Ø 28 mm. – 76 mm., 7/16, 9/16, 11/16 size. 8-10-12 (120-180-220-320 sand) Honing Stones. Flat stair type Valve grinding stones. Various surfaces stones. |
|
| |
|
|
MÜTEKS Valve Seat Extracting Apparatus
It is used through removing easily the valve seals on Valve guide throgh clips ay the end of the apparatus. |
| |
|
MÜTEKS Valve Seat Grinding Motor
Housing Grinding motor is electrical and has 11.000 rpm. It has a spring system apparatus on vvhich we developed specially to prevent vibration.
|
|
| |
|
|
MÜTEKS Cylinder Block Honing Head and Mobile Honing Head
The heads is original Sunnen type with 4 stands. The stands from 065 mm to 0215 mm make sensitive and clean surfaced honing. The heading is manuel. It has spare parts. Mobile Honing Heads are portable; the honing can be done even on vehicle. It vvorks on sheet kon stands with spring system |
| |
|
MÜTEKS Reamers
The Müteks Reamers with Helisel channel has been produced from HSS-3343 süper rabit material according to inner and external diameter of every kind of valves vvhich are used in automotive industry vvith Müteks quality from 05.00 mm to 016.00 mm vvith 0.01 mm accrual.
|
|
| |
|
|
MÜTEKS Valve Seat Opening Set
Valve Seat Opening Set composed 3 or 4 morse an done piece morse box and 31 pieces various opening housing spindles in various sizes from 4.95 mm to 130 mm. 8x8 HSS knife channel has been opened to housing opening spindle.
|
| |
|
MÜTEKS Housing Control Apparatus (Vacuum meter)
Housing Control Apparatus operates vvith a id ofair connected to compressor; the air coming from compressor turns its own pressure to vacuum pressure in its body. Checking ofgrinded housings through vacuuming on manifold surfaces and it removes valve practicing process. |
|
| |
|
|
MÜTEKS Cylinder Head Surface Line Apparatus
It is used to drow from taking reference from guide inner centers of original lines at cylinder head. |
